Please post your problems with your scenarios here.
(OFSS Mission 3 retry!)Can anyone comment on the "you can use the (+) Normal auto-pilot to hold angular alignment" until just before docking. I tried this and it didn't help at all. In fact - the issue seemed to be that Zarya was very gently rotating. (I.e. post dock, zoom x100, you can see a drift).
I haven't tried the Soyuz yet, so what is meant by "pulse RCS"?
CTV-LEO6:CTV-LEO6
STATUS Orbiting Earth
RPOS 3447977.72 -4035845.26 4321307.63
RVEL -5049.997 -5498.550 -1108.824
AROT -119.47 51.12 -60.56
VROT 0.00 0.08 -0.00
AFCMODE 7
[B][COLOR="Red"] PRPLEVEL 0:1.000000[/COLOR][/B]
IDS 0:241 100
NAVFREQ 0 0
XPDR 240
UMMUCREW -C_Haignere-40-65-74
UMMUCREW -JF_Clervoy-37-67-55
UMMUCREW -T_Reiter-35-70-45
UMMUCREW -C_Nicollier-35-70-45
UMMUCREW -A_Kuipers-35-70-45
UMMUCREW -R_Vittori-35-70-45
BEACON
ANTENNA 1 1.0000
PANEL 1 1.0000
PROBE 1 1.0000
ROT 1 1.0000
MET 2696010.0
STATION 0
O2time 57623
M2FUELFIXED
END
astrosammy said:Everything done with some minor problems:
It looks like the module in the payload bay was rotated by 180°. The grappling point was facing the payload bay floor, I had to edit the scenario to attach it to the RMS.
astrosammy said:The URMS seems to be unable to correctly grapple in the D3D9 client. Should be written into the manual for other D3D9 users.
Launch heading seems to be wrong, again this might be a D3D9 or Shuttle Fleet problem. I'll take a look at that.